Tripp Lite Cat6 Gigabit Snagless Molded Patch Cable (RJ45 M/M)
Patch cords take real abuse during moves and repatching. We build this green copper cable with snagless boots that keep the release tabs from snapping off when you pull a line through a crowded bundle. It seats firmly, holds its signal across the run, and keeps cross talk down.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- Meets category 6 cabling standards
- Premium cabling for category 6, category 5e and category 5 applications
- Drastically reduce impedance and structural return loss compared to standard 100MHz wire
- High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum
- Feature molded connectors with integral strain relief
How this one is built
Snagless boot design
The molded boot covers the plastic latch so the connector slides through tight wire managers and over neighboring cords without hanging up or breaking the tab.
Molded strain relief
Heavy molding over the plug base absorbs bending stress right where the jacket meets the housing, keeping individual conductors from pulling loose under tension.
Staggered pin layout
We stagger the contacts inside the clear connector body to isolate wire pairs from one another, holding down near-end crosstalk across the drop.
Green outer jacket
A solid green jacket helps you color-code network drops, identify specific subnets at the patch panel, or trace voice lines through a packed cabinet.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Connector | RJ45 |
|---|---|
| Color | Green |
| Weight | 1.28 ounces |
| Warranty | Lifetime limited warranty |
Others from ethernet cables
Sorted by how many people have rated them.
