Tripp Lite Cat6a 10G Ethernet Cable, Snagless Molded Slim STP Network Patch Cable (RJ45 M/M)
Crowded patch panels choke off airflow when thick cord bundles pile up between switches. We built this slim shielded patch cord with a reduced diameter to let ventilation move through packed frames while keeping line noise off your data runs. Molded boots protect the release tabs when pulling runs through tight bundles.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 25 FT: Distribute data, voice and video at higher speeds and quality with Tripp Lite’s Category 6a 10G Ethernet snagless molded patch cable, over 38% slimmer than standard Cat6a cables to increase airflow in full racks. Ideal solution for connecting printers, computers, copiers, routers, servers, modems, hubs and switches in high-density data centers. Length: 25 ft. / Color: Blue / Connectors: RJ45 Male
- SNAGLESS DESIGN: Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation. Ideal Cat6 Gigabit Snagless Molded Ethernet Cable. This cable ends feature 50-micron gold plating to help ensure the most accurate signal transfer possible, improving near-end crosstalk (NeXT) performance to 650 MHz.
- SNAGLESS RJ45 CONNECTORS: Snagless design protects the locking tabs from being damaged or broken off during installation. The contacts feature 50-micron gold plating to help ensure the most accurate signal transfer possible, improving near-end crosstalk (NEXT) performance to 500 MHz.
- PREMIUM PROTECTION & CONSTRUCTION: Shields disruptive EMI and RFI line noise that can disturb your electronics and inflict hardware damage or data loss. 28 AWG copper wire, the four-pair stranded cable is rated for speeds up to 10 Gbps. Integral strain relief reduces stress and helps prevent cracking or breaking loose from the connector.
- RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a Lifetime Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.
How this one is built
Shielded wire pairs
Stranded copper conductors sit inside overall shielding to block line noise and crosstalk from adjacent runs in dense trays. Signals stay intact between switches, servers, and storage arrays.
Slim outer diameter
The narrow profile takes up minimal space in vertical managers and across horizontal patch panels. Cool air passes through the cabinet more freely when bundles stay small.
Snagless molded boot
Molded boots cover the plastic retention clips so they do not catch and snap during moves or re-patching. Integral strain relief keeps the conductor pins seated through routine pulls.
Gold plated contacts
Gold plating across the contact points resists surface corrosion over repeated insertions. That keeps signal transfer clear across patch bays, wall jacks, and server interfaces.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Connector | RJ45 |
|---|---|
| Color | Blue |
| Warranty | Lifetime limited warranty |
Others from ethernet cables
Sorted by how many people have rated them.
