Tripp Lite Cat6a 10G Ethernet Cable, Snagless Molded Slim STP Network Patch Cable (RJ45 M/M)
Dense patch panels leave little room for bulky jackets. We build this thin network patch cable with shielding to quiet line noise and a narrow profile that leaves space for ventilation across busy switch bays. The molded ends keep your wire pairs firmly seated through moves and changes.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 1 FT: Distribute data, voice and video at higher speeds and quality with Tripp Lite’s Category 6a 10G Ethernet snagless molded patch cable, over 38% slimmer than standard Cat6a cables to increase airflow in full racks. Ideal solution for connecting printers, computers, copiers, routers, servers, modems, hubs and switches in high-density data centers. Length: 1 ft. / Color: White / Connectors: RJ45 Male
- SNAGLESS DESIGN: Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation. Ideal Cat6 Gigabit Snagless Molded Ethernet Cable. This cable ends feature 50-micron gold plating to help ensure the most accurate signal transfer possible, improving near-end crosstalk (NeXT) performance to 650 MHz.
- SNAGLESS RJ45 CONNECTORS: Snagless design protects the locking tabs from being damaged or broken off during installation. The contacts feature 50-micron gold plating to help ensure the most accurate signal transfer possible, improving near-end crosstalk (NEXT) performance to 500 MHz.
- PREMIUM PROTECTION & CONSTRUCTION: Shields disruptive EMI and RFI line noise that can disturb your electronics and inflict hardware damage or data loss. 28 AWG copper wire, the four-pair stranded cable is rated for speeds up to 10 Gbps. Integral strain relief reduces stress and helps prevent cracking or breaking loose from the connector.
- RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a Lifetime Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.
How this one is built
Slim shielded jacket
The narrow diameter takes up less room inside crowded wire managers and leaves open paths for air to circulate through packed server racks. Foil shielding quiets electrical noise between neighboring runs.
Snagless connector boots
Molded hoods cover the release tabs on both ends. You can pull the line back through bundles of cabling without catching the plastic clip on adjacent cords or snapping it off in the cabinet.
Gold plated contacts
Plated copper terminals resist corrosion and maintain solid metal contact inside the switch port. Clean contact surfaces help keep network signals clear across high traffic links.
Molded strain relief
Heavy duty molding anchors each connector body directly to the outer jacket. That reinforcement absorbs bending stress where the cord exits the port, reducing wear during moves and re-patching.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Connector | RJ45 |
|---|---|
| Color | White |
| Weight | 25 g |
| Warranty | Lifetime limited warranty |
Others from ethernet cables
Sorted by how many people have rated them.
