Tripp Lite Cat6a 10G Ethernet Cable, Snagless Molded Slim STP Network Patch Cable (RJ45 M/M)
Crowded wire managers leave little room for stiff cords. We built this slim patch cord with shielded twisted copper pairs to handle dense switch rows without choking ventilation in the rack. Snagless boots shield the connector tabs when you fish runs through full bundles.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 3 FT: Distribute data, voice and video at higher speeds and quality with Tripp Lite’s Category 6a 10G Ethernet snagless molded patch cable, over 38% slimmer than standard Cat6a cables to increase airflow in full racks. Ideal solution for connecting printers, computers, copiers, routers, servers, modems, hubs and switches in high-density data centers. Length: 3 ft. / Color: Black / Connectors: RJ45 Male
- SNAGLESS DESIGN: Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation. Ideal Cat6 Gigabit Snagless Molded Ethernet Cable. This cable ends feature 50-micron gold plating to help ensure the most accurate signal transfer possible, improving near-end crosstalk (NeXT) performance to 650 MHz.
- SNAGLESS RJ45 CONNECTORS: Snagless design protects the locking tabs from being damaged or broken off during installation. The contacts feature 50-micron gold plating to help ensure the most accurate signal transfer possible, improving near-end crosstalk (NEXT) performance to 500 MHz.
- PREMIUM PROTECTION & CONSTRUCTION: Shields disruptive EMI and RFI line noise that can disturb your electronics and inflict hardware damage or data loss. 28 AWG copper wire, the four-pair stranded cable is rated for speeds up to 10 Gbps. Integral strain relief reduces stress and helps prevent cracking or breaking loose from the connector.
- RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a Lifetime Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.
How this one is built
Slim profile routing
The reduced outer diameter takes up far less volume in tight vertical managers. Air moves freely through packed switch bays instead of stalling against a solid wall of thick cords.
Shielded copper construction
Foil shielding surrounds the twisted copper pairs to block stray electromagnetic noise from nearby power lines. Signals hold clean across high-density runs without bleed from neighboring data channels.
Snagless molded boots
Molded connector hoods cover the locking tabs so they do not catch and break when pulled backward out of a bundle. Strain relief keeps the wire from pinching at the plug root.
Gold plated contacts
Gold plating across the contact pins keeps insertion resistance low across repeated patching cycles. Clear pin mating limits near-end crosstalk between adjacent pairs.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Connector | RJ45 |
|---|---|
| Color | Black |
| Warranty | Lifetime limited warranty |
Others from ethernet cables
Sorted by how many people have rated them.
