Tripp Lite Cat6a 10G Ethernet Cable, Snagless Molded Slim UTP Network Patch Cable (RJ45 M/M)
Dense patch fields choke off cooling air when standard thick jackets pile up across switch faces. We build this slim copper patch cord with a reduced outer profile so warm air escapes tight rack rows. Molded boots cover the release tabs so you can pull a run back out without snapping plastic off the head.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 3 FT: Distribute data, voice and video at higher speeds and quality with Tripp Lite’s Category 6a 10G Ethernet snagless molded patch cable, over 38% slimmer than standard Cat6a cables to increase airflow in full racks. Ideal solution for connecting printers, computers, copiers, routers, servers, modems, hubs and switches in high-density data centers. Length: 3 ft. / Color: Aqua / Connectors: RJ45 Male
- SNAGLESS DESIGN: Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation. Ideal Cat6 Gigabit Snagless Molded Ethernet Cable. This 10' cable ends feature 50-micron gold plating to help ensure the most accurate signal transfer possible, improving near-end crosstalk (NeXT) performance to 650 MHz.
- SNAGLESS RJ45 CONNECTORS: Snagless design protects the locking tabs from being damaged or broken off during installation. The contacts feature 50-micron gold plating to help ensure the most accurate signal transfer possible, improving near-end crosstalk (NEXT) performance to 500 MHz.
- PREMIUM CONSTRUCTION: 28 AWG copper wire, the four-pair stranded cable is rated for speeds up to 10 Gbps. Integral strain relief reduces stress and helps prevent cracking or breaking loose from the connector.
- RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a Lifetime Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.
How this one is built
Slim jacket profile
Thinner than standard patch cords, this outer diameter takes up far less cross section inside vertical wire managers. Air moves past packed switches instead of banking heat against the faceplates.
Snagless tab hoods
Molded hoods ride up over the latch levers on both ends. You can fish a line back through bundles of dropped cabling without the latch catching on an adjacent loop and snapping off.
Gold contact plating
Stranded copper conductors terminate into plated contacts that resist corrosion over years in a patch frame. Clean metal contact keeps insertion losses low and helps limit near-end crosstalk across the link.
Molded strain relief
The hood is molded directly over the jacket termination to handle tight radius turns off the switch face. It absorbs mechanical tension so individual wire pairs do not pull loose from their crimps.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Connector | RJ45 |
|---|---|
| Color | Aqua |
| Weight | 27.22 g |
| Warranty | Lifetime limited warranty |
Others from ethernet cables
Sorted by how many people have rated them.
