Tripp Lite 1.9kW Single-Phase ATS/Switched PDU with LX Platform Interface
Network gear with only one power cord leaves a rack vulnerable if an upstream feed drops. We build this transfer switch to take primary and secondary power inputs, switching between them quickly enough that connected hardware keeps running. Individual outlet control lets you cycle power across the network without rolling a truck to the site.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 1.9kW 120V ATS / Switched PDU, Single phase 20A 120V
- Enables redundant A/B power option for single-corded network devices
- Separate primary & secondary inputs connect to any two compatible power sources
- 1U horizontal rackmount; 2 L5-20P / 5-20P inputs; 16 5-15/20R outlets
- 2-year limited warranty
How this one is built
Dual input sources
Separate primary and secondary power cords connect to independent utility feeds or backup units. If the main feed drops out or turns unstable, the internal switch transfers the load to the secondary source and drops back once primary power returns clean.
Individual outlet switching
Each receptacle can be turned on or off remotely over the network card. You can reboot locked hardware, sequence power-up routines to limit inrush current, or disable unused plugs so unauthorized gear stays off the circuit.
Horizontal rack mounting
The all-metal chassis bolts directly into standard equipment racks and takes up minimal space on the rails. It leaves room above and below for patch panels or cable managers, keeping the back of the cabinet serviceable.
Onboard network interface
The built-in management platform lets you monitor input power status and manage outlets through a web browser or remote management software. Firmware updates and configuration changes happen over the local network.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 16 |
|---|---|
| Voltage | 120 V |
| Amps | 20 A |
| Color | Black |
| Weight | 12.2 pounds |
Others from rack PDUs
Sorted by how many people have rated them.
