Tripp Lite 1.9kW Single-Phase Switched PDU with LX Platform Interface
Cabinet space fills up fast, and driving across town to power-cycle a frozen switch is dead time. We built this horizontal distribution unit to let you monitor current draw and power-cycle individual receptacles over your network. It drops directly onto standard rack rails.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 120V 20A maximum capacity (agency de-rated to 16 amps) Switched, Metered and Monitored Power Distribution Unit (PDU) with built-in web/network interface in 1U horizontal rack form factor
- Includes attached L5-20P input plug, 5-20P adapter cable and 16 5-15R controllable outlets (8 front/8 rear)
- Supports individually controllable output receptacles, current metering, network monitoring and remote control via built-in web/network monitoring and control card
- Offers the ability to turn on, turn off, recycle or lock-out power to each individual PDU receptacle on a programmable or real-time basis
- Switchable outlets enable a number of advanced networking abilities, such as remote rebooting of locked IT equipment, power-on/power-off outlet sequencing, automatic load-shedding, and disabling unused outlets
How this one is built
Receptacle level control
Each outlet switches independently over the network card. You can cycle power to an unresponsive server, stagger startup sequences to avoid inrush issues, or lock out empty receptacles so unapproved hardware stays off your feed.
Built-in network platform
The onboard interface plugs straight into your management network. It lets you monitor current draw remotely, track environmental conditions with add-on sensors, and handle load shedding if the primary feed gets tight.
Front and rear layout
Receptacles sit on both faces of the metal chassis. Patch cords land cleanly without stretching across the cabinet, giving network switches and servers short, direct paths to power on both sides of the rack.
Metal rack housing
The black metal enclosure mounts horizontally into standard cabinet posts. It takes the weight of heavy power cords, handles ambient cabinet heat, and keeps the incoming feed separated cleanly across internal circuits.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Color | Black |
|---|---|
| Weight | 16 pounds |
Others from rack PDUs
Sorted by how many people have rated them.
