Tripp Lite 5.8kW Single-Phase 208/240V ATS/Monitored PDU with LX Platform Interface
Single-cord servers and switches leave a rack vulnerable if their main feed drops. We build this automatic transfer switch PDU to pull from two separate utility lines, switching over before the load notices. The built-in network card lets you watch current draw and outlet status from down the hall or across town.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- High-capacity 5.8kW PDU with ATS provides remote power monitoring and enables redundant power for non-redundant hardware
- Two single-phase L6-30P inputs with 10 ft. cords
- L6-30R outlet for connecting single device or 0U vertical PDU
- Automatic transfer switching within 1-5 MS
- 2-year limited warranty
How this one is built
Dual input cords
Two dedicated power cords plug directly into separate AC sources. The unit prefers the primary line and switches over to the secondary feed almost instantly if line voltage fluctuates, keeping attached hardware up without manual intervention.
Network card interface
Our pre-installed network card gives you remote access to line telemetry over a standard browser. You can monitor power draw across the unit, check input status, and configure alert thresholds before a branch circuit runs hot.
Single high-capacity outlet
The single outlet on this model acts as a dedicated drop for heavy iron or feeds an entire downstream vertical distribution strip. That keeps secondary distribution neat while keeping the transfer switching up in the top rails.
Sheet metal chassis
The housing fits standard equipment racks and takes the bumps that come with sliding heavy hardware in and out. The all-metal build stays rigid when thick input cords are tied down tight to the rear frame.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 2 |
|---|---|
| Watts | 5800 W |
| Voltage | 240 V |
| Amps | 24 A |
| Connector | NEMA |
| Material | Metal |
| Color | Black |
| Weight | 16.9 pounds |
Others from rack PDUs
Sorted by how many people have rated them.
