Tripp Lite Basic PDU, 20A Dual-Circuit 40 Outlets (5-15/20R), 120V, NEMA L5-20P/5-20P Inputs
Racks loaded with dual-corded servers need separate power paths within the same frame. We built this unit with dual input cords and two distinct circuit banks to feed both sides of your equipment. It mounts upright in the cabinet channel to keep cabling clear of your exhaust airflow.
Price as our retail partner last listed it. They set it and they can change it, so the figure on their page is the one that counts at checkout.
- 3.8kW Single-Phase Dual-Circuit 120V Basic PDU delivers 120V AC power to equipment with dual redundant power supplies
- Dual NEMA L5-20P/5-20P inputs with 10 ft. (3 m) cords
- 40 NEMA 5-15/20R outlets in 2 separate circuits
- Switchless design prevents accidental shutdown and 20A circuit breakers protect from overload
- Supports toolless 0U vertical mounting in EIA-standard 19 in. racks
How this one is built
Dual input feeds
Two attached power cords route to separate utility lines or source circuits. Each line energizes its own group of outlets along the vertical chassis, keeping redundant power supplies cleanly separated inside one enclosure.
Unswitched outlet banks
Receptacles are split across the two circuits without master power switches on the face. An unswitched layout helps avoid accidental dropouts caused by a stray arm or a snagged cable during cabinet maintenance.
Circuit breaker protection
Thermal breakers built into the chassis handle overcurrent situations on either line. If a connected device draws too much current, the breaker trips on that specific circuit without disturbing the neighboring bank.
Vertical toolless mounting
Mounting buttons snap into the keyhole slots found on standard rack frames without needing a bag of hardware. Standing tall in the rear channel, the unit leaves horizontal rail spaces open for compute and storage hardware.
On the nameplate
These are the figures our retail partner lists for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 40 |
|---|---|
| Voltage | 120 V |
| Amps | 20 A |
| Material | Aluminum |
| Color | Black |
| Weight | 8.5 pounds |
Others from rack PDUs
Sorted by how many people have rated them.
