Tripp Lite Heavy-Duty Power Adapter Cord L5-20R to 5-20P, 20A
Server gear often arrives with a locking connector while the wall plate or distribution strip has straight blades. This short adapter bridges the gap without forcing you to reterminate cables or swap outlets. It stays out of the way behind the rack.
Price as our retail partner last listed it. They set it and they can change it, so the figure on their page is the one that counts at checkout.
- 6-inch 12AWG Heavy Duty Power Adapter cord (NEMA-L5-20R to NEMA-5-20P)
- Locking 120V 20A (NEMA L5-20R) output receptacle and a straight-blade 120V 20A (NEMA 5-20P) input plug
- Converts equipment with L5-20P locking input plug to a non-locking 5-20P input plug
- Also serves as a convenient means of converting a NEMA 5-15/20R straight-blade receptacle to a locking L5-20R receptacle
- Lifetime warranty
How this one is built
Molded plug ends
The heavy overmolding supports the connection points where straight-blade plugs join the locking side. It holds firm against line tension when cables drop straight down a back rail.
Heavy jacket build
The thick outer insulation handles the heat and contact typical of crowded rack bays. It resists kinks when bent behind equipment enclosures and power distribution hardware.
Firm locking socket
The female connector grips the matching equipment plug and stays seated until twisted loose. That keeps line vibration and accidental cable snags from dropping the feed.
Short drop reach
The short run keeps spare loop out of the cabinet airspace. It connects adjacent hardware without adding bundles of slack that block exhaust pathways.
On the nameplate
These are the figures our retail partner lists for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 1 |
|---|---|
| Watts | 28800 W |
| Voltage | 120 V |
| Amps | 20 A |
| Color | Black |
| Weight | 3.2 ounces |
Others from power cords
Sorted by how many people have rated them.
