Tripp Lite Metered ATS PDU, 10 Outlets (8 C13, 2 C19), 200-240V, 2 C20 12 ft. Cords
Redundant AC feeds keep single-cord network hardware running when one source falters. This metered transfer switch unit mounts horizontally in your cabinet, pulling from primary and secondary lines. Outlets power up in sequence to manage startup draw across your connected equipment.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- METERED ATS PDU 16/20A single phase 200-240V metered automatic transfer switch (ATS) power distribution unit with a digital LED meter allows locally monitoring input voltage and load levels and a built-in Automatic Transfer Switch (ATS) provides a redundant power option
- 10 OUTLETS 1U horizontal rackmount PDU features 10 total outlets - (8) C13 (2) C19 The outlets are programmed for sequential turn-on to prevent in-rush equipment interaction on startup Also comes with a set of two C20 inlets 12 foot cords to support connection to separate primary and secondary power sources
- RUGGED BUILD Built with a reversible all-metal case and high-quality outlets & plugs are designed to provide many years of reliable service under the most taxing environments Made with a built-in card slot to support optional SNMPWEBCARD to permanently upgrade this PDU’s C13 outlets to be remotely switched and monitored
- VERSATILE INSTALLATION The PDUMH20HVAT delivers reliable 20A 200/208/240V power and is suitable for 1U horizontal rackmount installation and is reversible to face the front or back of the rack
- 2 YEAR & FREE TECH SUPPORT Tripp Lite warrants this product to be free from original defects in material and workmanship for the duration of the If the product should prove defective in that time Tripp Lite will gladly repair or replace it Our Chicago-based Tech Support Team is ready to assist you call them at 773-869-1234 M-F 8am-6pm CST
How this one is built
Automatic source transfer
Dual input cords connect to separate utility lines or battery backups. The internal switch shifts the cabinet load to the secondary feed if the primary drops, maintaining an uninterrupted line to connected gear.
Local current meter
A front LED display reports line voltage and real-time load levels directly at the rack. Technicians can check available circuit headroom before adding another server or switch to the rail.
Staggered startup cycle
Receptacles energize in sequence rather than all at once on boot. This avoids heavy in-rush current spikes that trip upstream breakers when an entire row of hardware powers up simultaneously.
Reversible all-metal housing
Heavy steel chassis installs horizontally into standard rack rails, facing either the front or the rear of the enclosure. A built-in slot accommodates an optional network card for remote interface access.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 10 |
|---|---|
| Watts | 3800 W |
| Voltage | 230 V |
| Amps | 20 A |
| Connector | Power IEC 320 EN 60320 C20 |
| Material | Particle Board, Multilayer Board |
| Color | Black |
| Weight | 17.4 pounds |
| Warranty | 2 Year Limited Warranty |
Others from rack PDUs
Sorted by how many people have rated them.
