Tripp Lite Metered PDU, 15A, 14 Outlets (5-15R), 120V, 5-15P, 15 ft. Cord
Cabinet power belongs on the rails, where cords stay dressed and out of the way. We built this metered distribution unit to take one incoming line and feed gear across both sides of the chassis. The digital meter shows your current load right on the front face.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- Metered single phase 15A 120V PDU
- 1U horizontal rack mount; digital current meter
- NEMA 5-15P input; 15 ft. / 4.5m line cord
- 14 NEMA 5-15R outlets oriented with ground pin on the bottom (1 front / 12 rear)
- 2-year limited warranty
How this one is built
Digital load meter
The front display shows running current draw directly on the panel. You can check how hard the line is working before you patch in another switch or server.
Reversible chassis placement
Outlets sit on the front and back of the all-metal chassis, with the ground pins turned toward the bottom. Mount the unit facing forward or backward to match how your gear drops cables.
Heavy-gauge input line
A long input cord with a standard wall plug reaches down the rack to your wall socket or backup supply. The thick jacket holds up against rail edges and tight bends inside the cabinet.
All-metal rack housing
The steel enclosure bolts right into standard cabinet rails with included hardware. It stays rigid when cords are pulled, plugged, or dressed into bundles down the side posts.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Color | Black |
|---|
Others from rack PDUs
Sorted by how many people have rated them.
