Tripp Lite Metered PDU with ATS, 2/2.4KW Single Phase, 200/240V, 10 Outlet (C13), 2 C14 Input
Single-cord networking gear leaves a rack vulnerable to feed drops. We build this transfer switch PDU to pull from two separate circuits and hand power off between them without dropping the load. A digital meter shows the draw right at the rack face.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 2-2.4kW single-phase Metered power distribution unit with automatic transfer switch enables redundant power for network devices with non-redundant power supply configurations
- 10 C13 outlets (200-240V output) & dual 3.6 M input cords with IEC-320 C14 plugs connect to separate primary and secondary single-phase power sources
- Easy-to-read ammeter displays total current used by connected equipment
- Digital load meter for real-time output current monitoring
- 2-year limited warranty
How this one is built
Automatic source transfer
Two separate input cords plug into primary and secondary feeds. If the main circuit drops, the internal switch flips over to the backup line so single-corded switches and servers stay energized on the rails.
Front panel current meter
A digital display reads the aggregate load in real time. Techs can check total draw before patching in another box, which helps avoid tripping the breaker during normal operation.
Distribution across the rack
A bank of output receptacles routes single-phase power to equipment across the frame. The plugs seat firmly, giving network gear and chassis hardware a steady connection in crowded cabinets.
All-metal enclosure
The sheet-metal chassis bolts directly into standard rack rails. It holds up to daily service in telecom rooms and server rows where cables get routed, tied down, and rearranged.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 10 |
|---|---|
| Watts | 2400 W |
| Voltage | 230 V |
| Amps | 15 A |
| Connector | IEC-320 C13, IEC-320 C14 |
| Material | Metal |
| Color | Black |
| Weight | 10.3 pounds |
| Warranty | 2-year limited warranty |
Others from rack PDUs
Sorted by how many people have rated them.
