Tripp Lite Metered PDU with ATS, 20A, 16 Outlets (5-15/20R), 120V, 2 L5-20P / 5-20P adapters
Single-corded network switches and servers leave a cabinet exposed if an upstream feed drops. We build this auto-transfer switch PDU to take two separate lines and pass continuous power to your rail equipment. If the primary drops, it shifts to the secondary feed quickly enough that your hardware keeps running without a manual swap.
Price as our retail partner last listed it. They set it and they can change it, so the figure on their page is the one that counts at checkout.
- Included Components: Unit, Instruction Guide
How this one is built
Automatic source switching
Two input lines tie into the housing so your gear draws from redundant feeds. The transfer switch monitors the active line and shifts over when voltage sags or fails, then returns when the primary source recovers.
Visual load meter
A front digital readout tracks total current draw across your connected hardware. Techs can see line load at a glance while plugging in new gear, helping you balance circuits before a breaker trips during busy hours.
Rack rail mounting
Heavy steel ears attach to standard equipment posts in your network closet or server room. The chassis sits cleanly between rails, leaving room for cable bundles and power cords to route along the sides.
Reversible input leads
Dual input cables reach out from the back to meet separate utility drops, backup generators or distinct battery systems. Adapter plugs let you land the connections on different wall receptacles without rewiring the cabinet.
On the nameplate
These are the figures our retail partner lists for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 16 |
|---|---|
| Watts | 800 W |
| Voltage | 120 V |
| Amps | 20 A |
| Connector | NEMA |
| Material | Metal |
| Color | black |
| Weight | 5500 g |
Others from rack PDUs
Sorted by how many people have rated them.
