Tripp Lite Monitored PDU, 20A, 36 Outlets (5-15/20R), 120V, L21-20P, 10 ft. Cord
Cabinet gear needs clean power distribution and clear line monitoring before circuits approach capacity. We build this vertical PDU to bolt into equipment racks, take a single feed from the facility, and split it across multiple banks of gear. An onboard network interface lets you read current draw remotely, while the local panel shows what each bank pulls.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 5.7kW 3 phase 208V Monitored Power Distribution Unit (PDU) with built-in web/network interface
- Attached NEMA L21-20P 20A (3P+N+E) 208V 3 phase input plug with 10 feet/3m cord
- 0U, 70 inch/178cm vertical form factor supports installation in 2 or 4 post equipment racks
- 36 total NEMA 5-15/20R 120V outlets arranged in three single phase output load banks
- Lighted display with scroll-button offers power consumption in amps for all 3 loading banks, IP-address self-identification and 180 degree display rotation for overhead or raised floor power feeds.
How this one is built
Vertical rack mounting
The tall chassis mounts upright along the rear rails of an equipment rack without taking up horizontal shelf space. It drops into standard enclosures so server power cords route straight to their receptacles with short runs.
Three load banks
Outlets sit divided into three separate single-phase output banks along the length of the housing. Dividing the cabinet load this way helps balance draw across the line and makes circuit mapping straightforward during initial installation.
Digital display panel
The local lighted screen shows amp readings for the connected banks and identifies the network address on demand. A push button lets you rotate the readout orientation so the screen stays readable whether power drops from overhead or enters below.
Built-in network interface
An integrated web interface connects directly to your management network for remote monitoring. Techs can check power draw across the PDU from a browser without having to walk the floor and inspect individual cabinet meters.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 36 |
|---|---|
| Watts | 5700 W |
| Voltage | 120 V |
| Amps | 20 A |
| Connector | NEMA |
| Material | Plastic |
| Color | Black |
| Weight | 16.7 pounds |
| Warranty | 2 year limited warranty |
Others from rack PDUs
Sorted by how many people have rated them.
