Tripp Lite P005-003 Heavy Duty Power Extension Cord 15A 14AWG C14 to C13, 3-Feet Black
A short factory cord will leave you stranded between a rack PDU and the back of a server chassis. We build this extension cord with thick copper conductors and molded ends to bridge that gap without pulling hard on the socket. It routes cleanly along cabinet uprights or through office pathways.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- Molded, Heavy-Duty Power Cable, 3-ft.
- IEC-60320-C13 to IEC-60320-C14
- 14 AWG x 3C, SJT, 15A, 100-250 Volt
- RoHS Compliant; UL Listed
- Lifetime limited warranty
How this one is built
Molded terminal ends
Molded connectors keep the inner wire terminations seated firmly inside the plug heads. They withstand bending near the plug face when cables get dressed tightly behind a patch bay or shoved against a back wall.
Heavy gauge jacket
The thick outer jacket protects the internal copper bundle from scuffs, pinching against enclosure doors, and routine handling. It stays flexible enough to lay flat in cable trays and raceways without kinking.
Cabinet and floor runs
Longer reaches need enough conductor thickness so current flows steadily across the distance. This cord gives workstations, heavy lab gear, or rack hardware the reach needed to tap into the nearest power drop.
UL listed build
We build this assembly to meet UL standards for electrical cord sets. The plug blades seat straight and maintain solid friction in standard wall outlets and distribution strips throughout continuous duty cycles.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 1 |
|---|---|
| Watts | 3750 W |
| Voltage | 250 V |
| Amps | 15 A |
| Color | Black |
| Weight | 9.07 g |
| Warranty | Lifetime limited warranty |
Others from power cords
Sorted by how many people have rated them.
