Tripp Lite PDU Metered 16 C13 4 C19 3.2/3.8kW 208/240V C20/L6-20P 10ft Cord (PDUMV20HV-36)
Cabinet gear needs steady current and a clear view of total draw before someone plugs in another chassis. We built this metered unit to distribute single-phase power vertically along your rack frame while reporting active load right on the face. You see what the whole cabinet pulls at a glance.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- SINGLE-PHASE PDU DISTRIBUTES AND MONITORS NETWORK-GRADE POWER IN REAL-TIME: This metered PDU provides real-time local reporting of the total load level via its built-in digital current metering. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMV20HV-36 features 16 C13 and four C19 200–240V outlets for connecting equipment. Plug-lock insert sleeves are included to prevent connected cables from becoming accidentally dislodged. The switchless design helps prevent an accidental shutdown, which could lead to costly downtime.
- DIGITAL LOAD METER HELPS PREVENT POTENTIALLY EXPENSIVE OVERLOADS: A digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low.
- VERSATILE INSTALLATION OPTIONS GIVE YOU PLENTY OF CHOICES: The 40-inch 0U PDU mounts vertically in an EIA-standard 19-inch rack using the included toolless mounting buttons or the included mounting brackets with user-supplied hardware. You may also use the brackets to secure the PDU to the underside of a counter with the addition of two user-supplied screws. Bolt-down retention brackets keep power cords organized and your rack free of clutter.
- COMPATIBLE WITH A VARIETY OF INPUT CORDS TO FIT YOUR FACILITY'S POWER SOURCE: The PDU’s C20 inlet accepts a variety of 16A international cordsets. An included 10-ft. (3.05 m) cord with NEMA L6-20P input plug connects to an AC power source, generator or protected UPS system to distribute power to connected loads.
How this one is built
Digital load display
A built-in digital meter reads total draw across all plugged equipment simultaneously. Techs can check current levels directly at the rack before adding hardware, helping keep cabinet loads balanced and below circuit thresholds without guessing.
Vertical rail mounting
Toolless mounting buttons drop directly into standard rack channels, leaving horizontal rail space open for servers and switches. Included brackets also let you secure the housing to cabinet uprights or fasten it beneath a work surface.
Secured cord retention
Sleeves fit over standard equipment cords to grip the receptacles firmly. Power cables stay seated when you bundle harness runs, route patch cords, or pull nearby equipment forward on slide rails during maintenance.
Detachable input feed
The main power inlet accepts detachable line cords to match local wall receptacles, generators, or backup units. A heavy-duty cord comes in the box so you can tie into facility power right away.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Color | Black |
|---|
Others from rack PDUs
Sorted by how many people have rated them.
