Tripp Lite PDU Monitored 3.3/3.7kW 208/230V 20A 18 C13; 2 C19 Outlets C20/L6-20P LX Interface
Cabinet space is tight and load balance matters on every rail. We built this monitored unit to take a single power feed and split it across your rack gear while reporting current draw over the network. You see what the cabinet pulls without walking the floor with a meter.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 3.3/3.7kW 208/230V 16/20a monitored PDU with single-phase input
- C20 inlet compatible with wide variety of user-supplied power cords
- Detachable 10 ft. Cord with NEMA L6-20P Plug included
- Firmware upgrades support future product Enhancements
- 2-year limited warranty
How this one is built
Network reporting interface
The onboard interface lets you check line conditions and current load over the network. It takes firmware updates down the line so your monitoring stays current with your management software without pulling the hardware off the rail.
Detachable input cord
The unit comes with a detachable power cord that plugs into standard utility power. Because the chassis inlet unplugs, you can swap to another cord style if your cabinet feed changes later.
Metal chassis mounting
The all-metal housing bolts directly into standard equipment racks. It keeps outlets close to your servers and switches, which cleans up the cable runs and keeps heavy cords from dragging on the back doors.
Single-phase distribution
A single power feed connects at the inlet and routes out to a row of receptacles for your mounted hardware. It gives your switches and chassis cards steady power from one monitored source.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Weight | 6.5 pounds |
|---|
Others from rack PDUs
Sorted by how many people have rated them.
