
Tripp Lite SMART2200RM2U SmartPro 2000VA UPS Online Option 1950W AVR
Utility lines wander, dip, and spike throughout the workday. We build this rack battery backup to keep networking hardware running on clean sine wave AC while filtering line noise and correcting voltage swings without chewing into battery reserves. When the building goes dark, it gives your gear time to finish tasks or power down cleanly.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 2200VA HIGH END BATTERY BACKUP: Ideal 1950W 7-outlet power management for high-end in-rack networking equipment. One L5-20R and six 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are split into two independently switchable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
- ADVANCED POWER FEATURES: Automatic Voltage Regulation (AVR) maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged. EMI/RFI filters out disruptive electromagnetic and radio frequency interference that can inflict damage. ENERGY STAR 2.0 Certified UPS provides high efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.
- USER REPLACEABLE BATTERIES & NETWORK WEB CARD OPTION: User replaceable and hot-swappable internal batteries can be replaced easily in the field (744-A4852, sold separately). The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
- SMART FRONT-PANEL LCD INTERFACE: Features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.
- RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Manufacturer's Warranty that can be upgraded to a 3-Year Warranty with Registration. This device is protected by a $250,000 Connected Equipment Insurance and is covered by Tripp Lite's expert technical support team over phone, web and email.
How this one is built
Automatic voltage regulation
Line sags and surges get trimmed and boosted back to nominal output automatically. The internal charger keeps the cells ready while the inverter corrects incoming voltage anomalies without drawing down reserve runtime.
Switchable outlet banks
Outlets on the back divide into independently managed groups. You can drop nonessential loads during an extended blackout to stretch battery runtime for the core switches, or reboot frozen hardware remotely using an optional network card.
Front status screen
The rotatable display shows utility conditions, battery charge, and load levels directly on the bezel. Colored indicator lights show utility feed status, active inverter backup mode, and fault warnings at a glance across the aisle.
Hot swappable battery tray
Internal battery packs swap out from the front without dropping the load or unbolting the chassis from the rails. Air moves through front and rear fans to keep the electronics and cells cool inside deep cabinets.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 7 |
|---|---|
| Volt-amps | 2000 VA |
| Watts | 1950 W |
| Voltage | 145 V |
| Amps | 2.2 A |
| Connector | NEMA 5 15R/NEMA 5 15/20R |
| Material | Acrylonitrile Butadiene Styrene, Metal |
| Color | Black |
| Weight | 68 pounds |
Others from battery backups
Sorted by how many people have rated them.



