Tripp Lite SMART2200RM2UN SmartPro 2000VA UPS Network Card 1950W AVR
Utility feed fluctuates, and this rack-mount backup corrects low and high voltages without leaning on the cells. When the line drops entirely, it supplies clean sine wave power until servers shut down cleanly. The pre-installed card connects to your network for remote supervision and controlled outlet cycling.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 2000VA RACK MOUNT UPS: Battery backup features 1950W capacity, 7 outlets (one L5-20R and six 5-20R), and a 10ft power cord (NEMA 5-20P). Offers Pure Sine Wave output, Automatic Voltage Regulation (AVR), EMI/RFI noise filtering, and surge protection.
- ADVANCED POWER FEATURES: Batteries are user-replaceable with Eaton's 744-A4852 battery pack. UPS enables power management at the outlet group level. LCD screen provides multiple views to monitor power status and rotates for rack or tower setups.
- REMOTE MANAGEMENT: Pre-installed WEBCARDLXE card enables remote access via SNMP, web, SSH, or Telnet. Supports full device control, monitoring, and configuration over network. Sends user-configurable power alerts via SNMP or email.
- REMOTE MANAGEMENT: Pre-installed WEBCARDLXE network card enables secure access via SNMP, web, SSH, or Telnet. Supports acess, monitoring, control, and rebooting of managed devices. Sends user-configurable power alerts via SNMP or email.
- FULLY SUPPORTED: Features a 2-Year Limited Manufacturer's Warranty (3-Year with Registration) and a $250,000 Connected Equipment Insurance. To best support your purchase, Eaton's experts are available via phone, web, or email to address any concerns
How this one is built
Automatic voltage regulation
Our line-interactive design boosts sags and trims surges while keeping connected equipment on clean utility power. The internal battery pack stays charged for when the circuit drops entirely, which stretches cell service life in buildings with noisy electrical service.
Network management card
A pre-installed card lets you check power status, change configurations, and reboot specific outlet groups through a web browser, SSH, or SNMP. It routes alert messages by email so techs can respond before a cabinet runs out of reserve.
Rotatable front display
The front panel screen details load levels, voltage readings, and runtime estimates at a glance. It rotates easily so the text reads right whether the chassis sits flat on rack rails or stands upright on a floor.
User-replaceable battery pack
Internal cells swap out from the front without pulling the chassis off the rack rails or dropping the load. The pure sine wave inverter feeds active power supplies and sensitive gear with standard alternating current.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 7 |
|---|---|
| Volt-amps | 2000 VA |
| Watts | 1950 W |
| Voltage | 120 V |
| Amps | 20 A |
| Connector | NEMA |
| Material | Acrylonitrile Butadiene Styrene, Metal |
| Color | Black |
| Weight | 68.7 pounds |
Others from battery backups
Sorted by how many people have rated them.
