Tripp Lite Smartonline 8kva On-Line Double-Conversion Ups, 6u Rack/Tower, 200-240v C19 Outl
Utility feeds fluctuate all day long, especially in older industrial buildings or crowded telecom closets. We build this double-conversion system to isolate your equipment from dirty wall power. Incoming electricity converts to direct current and back to alternating current, leaving behind brownouts, sags, and frequency drift before power reaches your hardware.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
How this one is built
Double-conversion circuitry
The internal inverter continuously reconstructs clean alternating current for connected loads. Incoming line power never passes straight through to your hardware without filtering. Sags and momentary dips get ironed out before reaching delicate power supplies.
Rack or tower setup
Included brackets secure the chassis into a standard equipment rack, while separate stands let the enclosure sit upright on a floor or workbench. The front panel rotates so status displays remain readable regardless of orientation.
Battery reserve support
Internal battery cells take over the connected load without a transfer delay when the utility feed drops out entirely. That span gives operating systems time to finish write cycles and run automated shutdown routines.
Rear outlet banks
The back panel carries several output receptacles organized into separate groups. Network administrators can reboot locked hardware remotely by power-cycling one bank while leaving the remaining connected gear running on uninterrupted battery reserve.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Watts | 6400 W |
|---|---|
| Voltage | 208 V |
| Connector | IEC 60320 C19 |
| Color | Black |
| Weight | 254.4 pounds |
Others from battery backups
Sorted by how many people have rated them.
