Tripp Lite SU1000RTXLCD2UN 1000VA Online Double-Conversion UPS 900W
Line-interactive battery backup keeps servers and networking hardware running when AC power drops out or surges. We build automatic voltage regulation into the chassis so it corrects low line voltage without tapping the internal battery reserve. Hardware for rack rails or upright tower placement comes in the carton.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- 1000VA 900W BATTERY BACKUP UPS: SmartPro line-interactive UPS system with AVR and pure sine wave output provides battery backup and surge protection against blackouts, brownouts, surges and line noise. Features 8 standard NEMA 5-15R outlets.
- BUILT-IN NETWORK CARD: Enables remote configuration and management including load shedding and safe shutdown. The IP-based Auto Probe detects lost connections and automatically reboots equipment. Expand UPS runtime with BP36RT battery packs.
- 2U RACK MOUNT UPS: Included hardware mounts UPS in 2U of space in a 19-inch 4-post rack. Included support stands also enables vertical tower mounting. The eight-foot power cord with standard NEMA 5-15P plug connects to any compatible AC outlet.
- ADVANCED POWER FEATURES: Automatic Voltage Regulation maintains regulated 120V without using the battery. EMI/RFI filters out disruptive interference that can inflict damage. Internal batteries are user-replaceable with Eaton's 744-A3960 model.
- RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: Features a 2-Year Limited Manufacturer's Warranty and a $250,000 Lifetime Connected Equipment Insurance. This product is also covered by Eaton's expert technical support team over phone, web and email.
How this one is built
Line regulation and battery
Automatic voltage regulation trims high line spikes and boosts sags back into spec without drawing down the internal cells. When utility power cuts out completely, the inverter supplies clean sine wave power until equipment shuts down.
Network management card
An installed network interface card lets you monitor operating status, set up load shedding routines, and trigger remote restarts over the local network. An auto-probe feature detects dropped connections and power-cycles unresponsive gear automatically.
Chassis mounting options
The black metal housing slots into standard four-post equipment racks using the included rail hardware. If your installation calls for floor placement next to a workbench or under a console, the included support stands hold the chassis upright as a tower.
Serviceable cell tray
The internal battery assembly can be swapped out by the user when the cells age out, without unmounting the whole chassis from the frame. For extended run times during long utility outages, external battery packs connect through the rear panel.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 8 |
|---|---|
| Volt-amps | 1000 VA |
| Watts | 900 W |
| Voltage | 127 V |
| Amps | 7.5 A |
| Connector | NEMA |
| Material | Metal |
| Color | Black |
| Weight | 40 pounds |
| Warranty | 2-year limited warranty |
Others from battery backups
Sorted by how many people have rated them.
