Tripp LiteSU8000RT3U1TF 8000VA 7200W UPS Smart Online Rackmount 8kVA PDU 120V/208V 8URM
Server cabinets need clean power that does not waver when the utility line acts up. This on-line double-conversion system isolates connected loads from raw line noise and sags, feeding clean alternating current continuously. A detachable bypass PDU mounts right to the frame so you can pull the power module for maintenance without dropping the rack.
Price as the listing last showed it. Listings move, so the figure on the page you land on is the one that counts at checkout.
- Tripp Lite SU8000RT3U1TF 8kVA / 8000VA / 7200 watt on-line, double-conversion UPS system in 8U total rack/tower configuration (3U UPS power module, 3U external battery pack and 2U step-down transformer)
- Detachable PDU with manual bypass switch enables hot-swappable UPS power module replacement with no interruption in output power to connected networking equipment
- Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
- Hardwire input; 2 L6-30R, 4 L6-20R and 12 5-15/20R outlets
- Maximum installed rack depth of only 32.5 in. / 82.6cm inches
How this one is built
Detachable bypass PDU
A manual bypass switch on the breakaway distribution module routes raw utility power directly to your hardware. You can slide the main power module out of the rack for maintenance or replacement while everything downstream stays energized.
On-line double conversion
Incoming alternating current is converted to direct current and then regenerated back into pure sine wave power. The process isolates sensitive networking gear from frequency drift, line noise, surges, and brownouts on the commercial feed.
Hardwire utility landing
The input connects directly to dedicated building electrical circuits through a terminal block knockout. That direct feed gives you stable high-capacity service right at the bottom of the cabinet without leaning on standard wall receptacles.
External battery module
Dedicated heavy battery packs mount alongside the electronics to supply reserve run time when the main feed drops out entirely. The system draws from these cells without transfer time, bridging the gap until generators spin up or systems park cleanly.
On the nameplate
These are the figures published for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.
| Outlets | 18 |
|---|---|
| Volt-amps | 8000 VA |
| Watts | 7200 W |
| Voltage | 208 V |
| Amps | 34.62 A |
| Connector | NEMA |
| Color | Black |
| Weight | 402.2 pounds |
| Warranty | 2 year limited warranty |
Others from battery backups
Sorted by how many people have rated them.
