Jump to the catalog

Power protection and connectivity since 1922

Find a model number · Size a battery backup

Tripp Lite
Tripp Lite Network Copper RJ45 Ethernet to Fiber SC Duplex Multimode Extender Media Converter

Tripp Lite Network Copper RJ45 Ethernet to Fiber SC Duplex Multimode Extender Media Converter

Copper cable drops out when the run stretches too far between network closets. This compact media converter turns standard Ethernet into optical signals over duplex multimode fiber, bridging long distances across a facility without electrical interference along the path. It sits on a shelf or mounts cleanly where the line enters.

★★★★★4.6 out of 5
$60.68

Price as our retail partner last listed it. They set it and they can change it, so the figure on their page is the one that counts at checkout.

  • EXTENDS NETWORK CONNECTION OVER FIBER OPTIC CABLE: Extends a 10/100 Mbps Ethernet network connection over SC duplex multimode fiber optic cable up to 2 kilometers or 1.2 miles. Automatic MDI/MDI-X configuration connects devices without crossover cabling.
  • MONITOR YOUR INSTALLATION: LEDs indicate Ethernet connection and various statuses, including data transfer speed. Auto-detects half or full duplex operation on the fiber port.
  • ADVANCED FEATURES: Supports Multimode 50/125 cable up to 2KM or 62.5/125 cable up to 550M. Uses 62.5/125 or 50/125 Multimode cable at 1310nm wavelength.
  • BUILT TO WITHSTAND A VARIETY OF HAZARDS: Able to be operated in 32 to 122°F or (0 to 50°C) and stored in -4 to 158°F (-20 to 70°C) temperatures and 5% to 90% humidity relative humdity.
  • RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.
What it does

How this one is built

Duplex fiber port

SC duplex connectors accept multimode fiber lines to push your network link far past the boundary of twisted-pair wiring. The optical feed keeps traffic moving cleanly through noisy areas.

Twisted-pair copper jack

Standard Ethernet port features automatic MDI and MDI-X switching. You can patch straight in from a switch or workstation without hunting down a crossover patch cord.

Diagnostic light row

A row of front LEDs shows link activity, operating speed and connection state at a glance. You can verify network traffic and duplex status without hauling a tester into the room.

Compact metal housing

The black metal casing protects the internal board and handles typical closet temperature swings. It tucks neatly beside a patch panel or mounts out of the way on a backboard.

On the nameplate

These are the figures our retail partner lists for this unit. Where a number is missing here it was not printed on the listing, and we would rather leave the row out than fill it with a guess.

Specifications
Color‎Black
Weight‎13.6 ounces
Fiber cables$60.68